Save and Test Your Work Guide

Owned by Catherine Hillier (Unlicensed)
Last updated: Dec 13, 2023
3 min read

To learn about the basics of Motive and getting set up, check out the Platform Essentials course in Motive Academy.

 

Quick Links

 

Learn how to go from Storyflow to Headset

As you build your project in Storyflow you will need to jump onto the headset to test your work.  It's advised you do this as you go so that if a mistake is made early on you can correct it before you get too far.

Save in Storyflow

After each item you create or change in Storyflow, Save your work:  

 

If you try to move to a different area of Storyflow without saving, you will see a pop-up notification.  

View the Project in the Headset

After you’ve saved your work in Storyflow, you will want to view the work in the headset.

Open the APK

  1. Put on your headset

  2. In Oculus main menu, click on the square icon that is a grid of dots - these are your Apps: 

 

  • Click into the search bar at the top of the screen:

  • Open the dropdown:

  • Choose “Unknown Sources”:

 

  • Click Project to open:

 

Device Authentication

You will follow these steps every time you log into your headset. When your project opens up, you may see a screen like this:

This is to launch the learning experience for learners. As you are an Author, you need to set up the Author access.

  1. Click the menu button on the left controller:

 

  1. Choose Admin:

 

  1. Choose Storyflow Author:

 

  1. Now you will see a screen asking you to authorize. Choose Connect:

 

  1. You will see a Device Authentication number. Take note of the number

  2. Open Storyflow

  3. Navigate to your Project Dashboard

  4. Enter the same number you see in the headset

  5. Click the checkmark when you are done (not Enter):

  1. Back in the headset you will be asked to choose the Organization, Project, Space, and Scenario.

 

Reset

If you don your headset and are already in the scene, but you’ve made some changes in Storyflow, follow these steps:

  1. On the left controller, choose the menu button:

 

  1. You will see a menu appear - choose Reset:

 

Troubleshooting

If your changes are not live yet:

  1. Go to the Reset option in the menu above.  Wait a few minutes and try again.

  2. Check the Storyflow screen to make sure you Saved your changes.

  3. If after a few minutes it is still not live, Quit out of the Motive app to your headset's main screen and reload.

  4. If none of the above resolves your issues, please contact Motive Support via support@motive.io

 

Related Articles

Provision Your Headset

Using the Oculus Quest Controllers