For detailed instruction and learning, complete the Launch Essentials course in Motive Academy.

In this lesson, we’ll discuss a typical workflow you will follow when delivering training without an LMS (an example is a Pilot Project):

Quick Steps

Full Details on these steps are available by taking the Launch Essentials course in Motive Academy.

Publish the Scenario with a Completion Resource into a Bundle

Permission Required: Storyflow Organization Member or Admin

Add a Completion Resource to the Scenario
Publish the Scenario. By default it is “Draft”. Click on it to open it and change the Status and save

Deploy the Bundle

Permission Required: Storyflow Organization Member or Admin

Go to the Bundles Tab
Give your Bundle a name that clearly identifies it
Click Publish. You will then see it listed
Choose Deploy. This automatically sends the Bundle to Launch for us as Content

Create Module from Bundle

Permission Required: Launch Organization Member or Admin

Open Launch
Go to Modules. Here we will create a module from the Content we just created.
Select Create Module
Give the Module a title
Optional: add a Description
Optional: add an image – the learner will see this in their learner view
Under Content, Choose the bundle you just uploaded by clicking on the dropdown arrow and choosing it from the list
Choose the specific scenarios to be included in this Module
Under LRS communication method – leave the default “Communicate with an LRS via Launch”
Click Create

Review and Add Learners

Permission Required: Launch Organization Member or Admin

Click Add

18: Under the Add Existing Users tab, you can see learners that have been previously added to your Organization. You can add a learner to the course by selecting their name and then using the “Add” button

If the learner doesn’t already exist however, they need to be added. If I click on the “Create New Users” tab, you can see that I don’t have permissions to access it as I don’t have the Identity Organization Admin Permission:

This is what you would see if you have the Identity Organization Admin Permission:

Fill out the fields to add a new learner

You can alternatively add learners in bulk in the Manage Organization area.

Add the Learner to the Module

Permission Required: Launch Organization Member or Admin

Open Modules
Click the Manage Learner Access for the Module
Click Add
Choose the Learner from the list
Click Add

You are also able to add Learner Groups.

Provision Devices

Permission Required: Launch Organization Member or Admin

Note: This step can be done anytime after Step 1 but must be done before the learner can launch training

In order to provision the devices, you or another individual must have physical access to all the headsets. There are a few types of scenarios that could happen here:

First, let’s look at a Learning Manager that has physical access to all the headsets.

Open Launch
On the left hand side go to Devices
Then click on Provision New Device
Note there is a User Code field – you’ll fill it out in a moment:
Put on your headset and open the APK
You’ll see the screen for Device Authentication
Click Connect:

You’ll see the Authentication Number – you’ll need this in a moment
Open Launch on your computer
Enter the Authentication Number in the User Code field:

It’s highly suggested that you re-name the device with a more descriptive title. Otherwise, you’ll have to associate the device with the serial number.

Click Submit
Refresh to see the new device added:

Back in the headset after you’ve completed the Device Authentication, the next screen will be the Launch Experience:

The next time this headset it logged into and the APK launched, it will go straight to the Launch Code screen. You only need to provision this particular device the one time.

If we look at our example again where the Learning Manager does not have physical access to the devices, then you would follow these steps:

You need to complete all of these steps together in one session. If the individual logs out of the headset, before you provision the device, then the next time they go to log in you would have to do this again.

Learner Generates Launcher

These steps are completed by the learner.

37. Log into email and see the email to confirm Motive email

Set the password and log in
Open Launch
Open the Session to be completed
Click Launch Session at the top right of the page

Learner Completes the Training

These steps are completed by the learner.

Put on headset
Log into APK
Enter the 6 digit Launcher into the screen in the headset
Complete the training
Quit

All other Learners would also complete these steps individually and complete their training in the VR headset.

View the Session Data

Permission Required: Launch Organization Member or Admin

Open Launch
Go to Sessions and see data

Deliver Training: Author Workflow without an LMS

Quick Steps

Related Articles